Televes 531983 SmartKom Intelligent Signal Combiner and Amplifier – Combines Up to 3 Antennas, Rotor Alternative, 32 Per-Channel Filters, Bluetooth App Control, ATSC 3.0 Ready, Made in Spain

Product description

• The smarter alternative to an antenna rotor: If your broadcast towers are in different directions, a rotor forces you to pick one direction at a time — and rescanning every time you change. SmartKom lets you point up to three separate antennas at different directions simultaneously. It combines all of them into one clean output wire. Every channel from every direction, available to every TV, all the time. No moving parts, no rescanning, no maintenance.
• Solves the toughest multi-antenna combining problems: Passive combiners cause signal loss and create co-channel, multipath, and phasing interference because each antenna picks up undesired signals from the other directions. SmartKom eliminates this. It individually filters every channel from each antenna input, rejects the off-axis contributions, adjusts each channel to the same output level, and delivers a single perfectly balanced, interference-free signal.
• Per-channel automatic gain control on 32 filters: SmartKom's 32 programmable digital filters work on a channel-by-channel basis with 60 dB of dynamic range. Each channel is individually amplified and balanced to a consistent output level regardless of how strong or weak the incoming signal is. Even in a single-antenna installation, SmartKom eliminates the problem of overpowering strong channels drowning out weak ones — something a conventional preamp simply cannot do.
• One button auto-setup — or full manual control via app: Press and hold the auto-scan button for 5 seconds. SmartKom scans all inputs, identifies available channels, filters and balances everything automatically, and powers any connected Televes antennas or preamplifiers. No climbing the mast to configure it. For advanced control, the free ASuite app (iOS and Android) connects wirelessly via Bluetooth and lets you select specific channels per input and fine-tune individual channel levels from the ground.
• Filters all interference before it enters your system: Built-in LTE and 5G cell signal filtering (above 608 MHz) blocks the most common sources of OTA interference and overload. Configuration is saved in memory, so a power outage will never cause you to lose your setup.
• Enough output for a whole home or small commercial installation: High output level (25 dBmV fixed, maintained by AGC) is sufficient to feed an entire single-family home to multiple TVs, or small commercial applications like a business or small apartment building. Mounts on the mast outdoors in a weatherproof Zamak and ABS enclosure, or on a wall indoors. Powered over the same coax that carries your signal.
• Compatible with 4K and NextGen TV: Works with existing HDTV signals and ATSC 3.0 (NextGen TV / UHD 4K OTA) broadcasts. Pairs perfectly with any Televes antenna or any passive third-party antenna.