NUX Time Core Deluxe MKII Delay Effect Pedal, 7 Types Delay, 40 Seconds Stereo Phrase Looper, Delay Type Knob, Repeat Knob, Footswitch & FS Indicator, Toggle Switch

Product description

• 【7 Different Delay Types】 The NUX TIME CORE DELUXE MKII is a delay pedal with 7 different types and a phrase looper; including ΦPhi Digital Delay, Analog Delay, Modulation Delay, Tape Echo, Pan Delay, Verb Delay, Reverse Delay and Sound On Sound. You can switch the delay type by using the Type rotary switch.
• 【Toggle Switch】 This switch sets the bypass mode and Tone Lock. Selecting Tail sets the Buffer-Bypass to keep the delay with spillover while disengaged. TB means True-Bypass, there is no spillover while you disengage the effect. T.Lock means Tone Lock, an innovative function to store and lock your current parameter setting to prevent accidents on stage. After you set the parameters, just toggle the switch to T.Lock position, then the LED indicator will flash GREEN 2 times to store and lock the parameters.
• 【Time&Mix&Delay Type&Repeat Knob】Time knob adjusts the delay time. Mix knob Adjusts the wet/dry mixing level of delay,from 0% up to 100% when you turn the knob clockwise.Delay Type knob selects the type of delay. Repeat knob Adjusts the repeat numbers of delay. In Mod D. or Verb, hold the footswitch to enter to Alt mode, (the LED indicator will flash ORANGE), now the Repeat knob will adjust the Mod or Verb parameter. Short press the footswitch to quit Alt mode.
• 【In Jacks&Out Jacks】In jackst:the audio inputs on the right side of this pedal are standard 1/4′′ jacks (mono/TS). Connect your guitar to the In (mono) audio input on the right side of your pedal using a regular 1/4′′ instrument cable.1. Out jacks:the audio outputs on the left side of this pedal are standard 1/4′′ jacks (mono/TS). Connect the audio output of your pedal to the next device in the signal chain, either with a single cable or with a pair of 1/4′′ cables if both inputs are used.
• 【Footswitch & FS Indicator】Press once to engage/disengage the effect. Press twice, it will become Smart Tap Tempo. The delay time is related to tap tempo and current sub-division parameter. (The FS indicator will flash as current BPM.)Note: The maximum delay time of tap tempo is 1580ms. When the effect is engaged, the FS indicator will show “Red”. While the effect is disengaged, the FS indicator will turn off.